- Ergonomic Design: EndoPro has ergonomic design which makes it fit for the dentist's use.
- Slim body: The slim body and extremely small head allow optimal visibility during procedures.
- Hygiene and maintenance: The contra-angle head is sterilizable and thermo disinfectable. Handpiece drive and charging station can be disinfected through wiping down, and can be cleaned with a soft cloth with ethanol.
- Simple interface design
- High brightness LED to provide better illumination during RCT
- Stable and prolonged usage.
- Auto reverse and auto forward mode.
- Reliability with long-life Li-ion battery.
Waldent EndoPro LED Cordless Endomotor is designed for optimum freedom making conventional endodontics better & efficient. EndoPro amazes as a cordless endomotor with brilliant & smart optimization for Advanced Endodontics.Optimum head size enables better view for the endodontists thus, enhancing their efficiency.
THIRD GENERATION ENDOMOTOR WITH 16:1 GEAR RATIO
WORKING MODES
AUTOMATIC STOP:
- When the resistance is higher than the torque , there is no automatic reverse , and the equipment will stop working.
FORWARD & REVERSE RECIPROCATING MOTION:
- It will keep forward and reverse circularly , the time would be forward 1/2 seconds, reverse 1/4 seconds
AUTOMATIC REVERSE & STOP:
- When the resistance is higher than the torque , the equipment will auto-reverse , and then stop after the resistance disappears.
AUTO-CONTINUOUS:
- When the resistance is higher than the torque, the equipment will auto-reverse, and will be forward again after the resistance disappears.
- Speed : 140 -550 rpm
- Torque : 0.3 - 3.0 N.cm
TECHNICAL SPECIFICATIONS:
| MAIN UNIT |
|
| Battery Voltage |
DC 3.7V |
| Battery Capacity |
950mAh |
| Preset Programs |
9 Types |
| Working Modes |
4 Kinds |
| Standard Configuration Contra-Angle |
16:1 |
| Weight |
120g |
| |
|
| POWER ADAPTER |
|
| Rated Input Voltage |
AC 110-220 |
| Output Voltage |
DC 5V |
| Output Current |
1A |
Packaging:
- 1 x Endomotor Unit.
- 1 x Charging Unit.
- 1 x Power Adapter.
- 2 x LED light source lamp.
Directions for use
- Installation of the contra-angle head - Push the contra-angle head securely into the corresponding location spot of the EndoPro endomotor. For removing the contra angle handpiece, pull it out directly in a straight direction.
- Changing the root canal files - Insert the file into the shaft hole of the contra angle handpiece until a click is heard. Do not press the push button of the contra angle handpiece while inserting, then try to take out the file without pressing the button of the contra angle handpiece. If the file does not come out, it means that the file is installed well. For removing files, please press the push button on the head of the contra angle handpiece and take off the file.
- Press the power key for 2 seconds, the screen will display and endomotor will be ready to operate. Then press the program key “P” to choose the procedure, and press “+/-” key to choose speed.
- Press the “P” button for 2 seconds, when the screen displays 16:1, then press “P” button again, you can switch the torque with the “+/-” button. By pressing the “P” button again, you can choose mode : automatic stop, forward and reverse reciprocating motion, automatic reverse and stop, auto continuous mode.
- When you are working and you need to change the speed, press “+/-” button directly.
- Press the “exit” button to quit the current working situation. Long time pressing of this key will cause files to rotate in reverse.